Adding a subwoofer is the biggest upgrade you can make to a system that doesn't have one, and you don't need to spend much to get it. These are the best inexpensive subs, compared on the numbers that matter: amplifier power, driver size, and connections.

The short answer

The Dayton Audio CS1200 (~$240) is the best budget subwoofer: a 12-inch driver, a 200-watt RMS amp, and a 5-year warranty.

Under $200, get the Klipsch R-100SW (~$198). For a small room, the 10-inch Dayton CS1000 (~$200) keeps most of the CS1200's power.

Some links below are Amazon Associates affiliate links. If you buy through them, this site may earn a small commission at no extra cost to you. That has no bearing on which products get recommended — see our full affiliate disclosure.
In this guide
  1. What a budget sub can do
  2. Quick comparison
  3. The best budget subwoofers
  4. When to spend more
  5. How to choose
  6. Frequently asked questions

What a budget subwoofer can (and can't) do

A subwoofer is the biggest upgrade you can make to a system that doesn't have one. Even an inexpensive sub takes the deepest bass off your speakers and receiver, which makes explosions and bass lines fuller and lets your main speakers play cleaner. Under about $300, you can get a 10- or 12-inch sub with a real amplifier and the controls you need to blend it with your speakers.

What you give up at this price is clean output at very loud volumes in a large room, the deepest bass below about 25 Hz, and features like app control and room EQ. If you have a big open room or want reference-level movie nights, look at our best subwoofers instead.

Our picks are based on manufacturer specifications and published reviews. We haven't tested these subwoofers ourselves. Every pick is sold new on Amazon.

Quick comparison

SubwooferDriverAmplifierCabinetSpeaker-level inputsPrice
Dayton Audio CS120012"200W RMSPortedYes~$240
Klipsch R-100SW10"150W continuousPorted (rear)No~$198
Dayton Audio CS100010"180W RMSPortedYes~$200

The best budget subwoofers

Best budget subwoofer~$240
Dayton Audio CS1200
12" driver · 200W RMS · ported · 26–200 Hz · 5-year warranty

The most subwoofer for the money right now. Dayton pairs a 12-inch mineral-filled paper cone with a 200-watt RMS amplifier (a continuous rating, not a peak number) in a ported cabinet rated down to 26 Hz. A July 2026 review from Pragmatic Audio found it digs deeper and plays cleaner than its price suggests. It has every connection a budget sub should: LFE and stereo RCA inputs, speaker-level inputs with pass-through for older stereo amps, a 40–160 Hz crossover, a 0/180° phase switch, and auto-on. Dayton backs it with a 5-year warranty, which is unusually long.

Worth knowing: it's big for a budget sub, at about 15.5 × 18 × 16.4 inches and 39 pounds, so plan where it will go. It comes in black or a wood finish.

Check price on Amazon Prices change often — verify current pricing on Amazon.
Best under $200~$198
Klipsch R-100SW
10" spun-copper woofer · 150W continuous / 300W peak · rear-ported

Our long-time budget pick in the best subwoofers guide, and the natural match for Klipsch Reference speakers like the R-50M or R-600F. A 10-inch spun-copper woofer and a 150-watt continuous digital amp add real weight to movies for well under $200. It's the easiest first sub for a 5.1 system that doesn't have one.

Worth knowing: the port fires out the back, so leave a few inches between it and the wall. It has an LFE/RCA input but no speaker-level inputs. Klipsch's own store now sells the newer R-101SW instead, but the R-100SW is still sold new on Amazon for far less.

Check price on Amazon Prices change often — verify current pricing on Amazon.
Best for small rooms~$200
Dayton Audio CS1000
10" driver · 180W RMS · ported · 28–200 Hz · 5-year warranty

The CS1200's smaller sibling, for an apartment, bedroom, or a living room where a 12-inch sub won't fit. It keeps nearly all of the amplifier (180 watts RMS) and the same full set of connections and controls: LFE and stereo RCA inputs, speaker-level inputs with pass-through, a 40–160 Hz crossover, phase switch, and auto-on. It's rated to 28 Hz, only slightly higher than the 12-inch model.

Worth knowing: at about 13.5 × 16 × 14.4 inches and 29 pounds, it's noticeably more compact than the CS1200. Same 5-year warranty.

Check price on Amazon Prices change often — verify current pricing on Amazon.

Why no Polk? The Polk Monitor XT12 and PSW10 are popular budget subs, but on Amazon right now the XT12 costs about $399 and the PSW10 about $249. That puts both above the Dayton CS1200, which has a 200-watt RMS amplifier, while Polk rates the PSW10 at 100 watts peak and doesn't publish a continuous rating for the XT12. If you're matching Polk Monitor XT speakers and the XT12 goes on sale, it's still a sensible choice.

When to spend more

The step above budget subs is worth it if you have a medium or large room, watch a lot of action movies loudly, or listen to music where tight, accurate bass matters. Two picks from our main guide are the next stop:

Not sure what size or type you need? Our Subwoofer Matcher recommends how many subs, what size, sealed or ported, and where to set the crossover for your room.

How to choose a budget subwoofer

10 inches or 12 inches?

A 12-inch sub moves more air and usually plays deeper and louder, which helps in medium and larger rooms. A 10-inch sub is easier to place and plenty for a small room or apartment. At this price, the amplifier matters as much as the driver: a 10-inch sub with a strong amp can outplay a 12-inch sub with a weak one.

Watch the power ratings

Look for a continuous or RMS rating. "Peak" and "dynamic" figures are often double the continuous number or more, so a "300W" sub might have a 150W amp. Dayton lists RMS power and Klipsch lists both, but some brands list only peak power, which makes them hard to compare directly.

Sealed or ported?

Every pick here is ported, because a port gets more bass output from an inexpensive amp and cabinet. That suits movies. Sealed subs are tighter and more compact, but good ones cost more. Our sealed vs. ported guide explains the trade-off.

Connecting it

With an AV receiver, use a single RCA cable from the receiver's "Sub" or "LFE" output to the sub's LFE input, then set the crossover in the receiver (80 Hz is the usual starting point) and turn the sub's own crossover knob all the way up. With a stereo amp that has no sub output, use the sub's speaker-level inputs instead. Then see our guides to subwoofer placement and setting subwoofer phase.

Frequently asked questions

What is the best budget subwoofer?
The Dayton Audio CS1200. It has a 12-inch driver, a 200-watt RMS amplifier, a ported cabinet rated to 26 Hz, speaker-level and LFE inputs, and a 5-year warranty, for about $240.
What is the best subwoofer under $200?
The Klipsch R-100SW. It has a 10-inch spun-copper woofer and a 150-watt continuous amp, and it's the natural match for Klipsch Reference speakers. The port is on the back, so leave space behind it.
Is a 10-inch or 12-inch subwoofer better?
A 12-inch sub usually plays deeper and louder, which suits medium and larger rooms. A 10-inch sub is easier to place and plenty for a small room. At budget prices, a strong amplifier matters as much as driver size.
Is a cheap subwoofer worth it?
Yes. Even an inexpensive sub fills in the deep bass that bookshelf speakers and soundbars can't reproduce, and it lets your main speakers play more cleanly. Look for a continuous (RMS) power rating, not just a peak number.
Can I connect a subwoofer to a stereo amplifier?
Yes. If your amp has a subwoofer output, use that. If not, choose a sub with speaker-level inputs, like the Dayton CS1200 or CS1000, and connect it with speaker wire from the amp.