The phase control is the most ignored knob on a subwoofer, and setting it wrong can cancel out the bass you paid for. It takes five minutes to get right.

The short answer

There's no universal right setting. Start at 0° if the sub is near your front speakers, and try 180° if it's much closer to or farther from your seat.

Then test both from your main seat with an 80 Hz tone and keep whichever sounds louder and fuller. Louder means the sub and speakers are adding together instead of canceling.

In this guide
  1. What the phase control does
  2. 0 or 180: which should you use?
  3. Phase dial vs. polarity switch
  4. How to set it, step by step
  5. Does room correction set it for you?
  6. Signs your phase is wrong
  7. Frequently asked questions

What the phase control does

Your subwoofer and main speakers both play the bass frequencies around the crossover point, usually near 80 Hz. For the bass to add up, their sound waves need to arrive at your seat in step. If they arrive out of step, they partly cancel, and you get a thin, hollow sound right where bass should be fullest.

Waves can arrive out of step because the sub sits at a different distance than your speakers, or because the crossover filters in your receiver and sub shift the timing. The phase control delays the sub's output slightly so its waves line up with the speakers' at your seat.

0 or 180: which should you use?

There's no universal right answer, because it depends on where the sub sits relative to your speakers and your seat. That's why the control exists. As a starting point:

Then test both, using the method below, and keep whichever gives louder, fuller bass at your seat. The correct setting is always the one that sounds louder at the crossover frequency, because that means the sub and speakers are adding together instead of canceling.

Phase dial vs. polarity switch

Many subs have a simple 0/180 switch. Strictly speaking, that's a polarity switch: it flips the signal upside down. A continuous phase dial, usually 0 to 180 degrees, lets you shift the timing in smaller steps for a more precise match. Aperion's Daedalus DS10, for example, has a continuous 0–180° phase knob, and SVS subs like the SB-1000 Pro offer both phase and polarity controls in the SVS app, which you can adjust from your seat.

If you only have a switch, test both positions. If you have a dial, use the method below to find the best spot between 0 and 180.

How to set subwoofer phase, step by step

  1. Set the crossover first. Set your receiver's crossover for the main speakers (80 Hz is a good default), and set the sub's own crossover dial to LFE or its highest setting so the receiver handles it.
  2. Sit in your main seat. Phase only matters where you listen. Use a phone or tablet app if your sub has one, or have a helper turn the knob.
  3. Play a test tone at the crossover frequency. An 80 Hz tone played through both the sub and the main speakers is ideal. A music track with steady bass around 80 Hz also works.
  4. Sweep the phase. Flip the switch, or turn the dial slowly from 0 to 180, and listen for the setting where the tone is loudest. A free SPL meter app on your phone makes the difference easy to see.
  5. Keep the loudest setting. Then rerun your receiver's room correction, if it has one, so it measures the sub at its new setting.

Does room correction set phase for you?

Partly. Systems like Audyssey, YPAO, and Dirac measure each speaker's distance and set delays so sounds arrive together, which takes care of much of the timing difference. But they can't fix everything, especially the extra timing shift from the sub's own crossover and amplifier. It's still worth checking phase by ear or with a meter, then rerunning room correction. Our room correction guide explains what those systems do.

Signs your phase is wrong

If none of the phase settings help, the problem is probably placement. Moving the sub even a couple of feet can change the bass at your seat dramatically. Our subwoofer placement guide walks through the subwoofer crawl.

Frequently asked questions

Should subwoofer phase be 0 or 180?
It depends on where the sub sits. Start at 0 degrees if it's near your front speakers, and try 180 if it's much closer to or farther from your seat. Test both from your listening position and keep the one that gives louder, fuller bass.
What does the phase switch on a subwoofer do?
It shifts the timing of the sub's output so its sound waves line up with your main speakers at your seat. When they line up, the bass around the crossover adds together; when they don't, it partly cancels.
Is subwoofer phase the same as polarity?
Not quite. A 0/180 switch flips polarity, inverting the signal. A continuous phase dial shifts timing in smaller steps, which allows a more precise match.
Does Audyssey or room correction set subwoofer phase?
Partly. Room correction sets distances and delays, which handles much of the timing, but it can't correct everything. Check phase by ear or with a meter, then rerun room correction.
How do I know if my subwoofer is out of phase?
Bass sounds thin at your seat, voices and bass guitar sound weak just above the sub's range, or turning the sub up makes it louder without making it fuller. Try the other phase setting and compare.