Plan a complete, matched home theater in a minute. Pick a layout, a speaker family, and how many subwoofers you want, and the builder fills in every speaker, picks a receiver with enough channels and subwoofer outputs, and adds up the cost. Swap anything you like, and it tells you if the change creates a mismatch.

The short answer

Start with 5.1 for most living rooms, or 5.1.2 if you want Dolby Atmos. Keep the front left, center, and right speakers from the same speaker line.

For several seats, two identical subwoofers usually beat one bigger sub. For three or four subs, choose a receiver with four subwoofer outputs, or split an output with a Y-splitter.

Some links below are affiliate links, including Amazon Associates and Aperion Audio links. If you buy through them, this site may earn a small commission at no extra cost to you. That has no bearing on which products get recommended — see our full affiliate disclosure.
In this guide
  1. The System Builder
  2. How the builder picks your system
  3. Choosing a layout
  4. Why the center should match
  5. One subwoofer or several?
  6. The speaker families
  7. About the prices
  8. Frequently asked questions
Your system
—
Receiver
—
Estimated total
—

    Swap any speaker, subwoofer, or receiver with the menus. Prices are what we saw in November 2026 and change often, so check the current price before you buy. Aperion prices are from Aperion's own store. The total doesn't include speaker wire, mounts, or a display.

    How the builder picks your system

    Pick a layout and a speaker family, and the builder fills each position with speakers from that family: the fronts, a matching center channel, surrounds, height speakers if your layout has them, and the subwoofers. Then it chooses the least expensive receiver we cover that can power every speaker and has enough subwoofer outputs for the number of subs you picked.

    Every product in the list is one we already recommend in our buying guides, and each row links to our take on it. You can swap any position. If a swap creates a mismatch, like a center from a different speaker line, the builder tells you why that matters.

    Choosing a layout: 5.1, 7.1, or Atmos

    The first number is the number of ear-level speakers, the second is the number of subwoofers (the builder lets you choose one to four), and the third is the number of height speakers for Dolby Atmos. A 5.1 system is the sweet spot for most living rooms. 7.1 adds rear surrounds, which helps in bigger rooms with seating away from the back wall. Height speakers add the overhead layer: 5.1.2 is the simplest Atmos system, and 5.1.4 or 7.1.4 gives the most convincing overhead effects. Our 5.1 vs. 7.1 vs. Atmos guide goes deeper.

    LayoutSpeakersReceiver you need
    2.1 or 3.12 or 3Any receiver (a 5-channel model has room to grow)
    5.155-channel or more
    7.1 or 5.1.277-channel or more
    7.1.2 or 5.1.499-channel, or 7-channel with processing for 9 plus a power amp
    7.1.41111-channel, or 9-channel with processing for 11 plus a power amp

    "Amplified" channels are the ones the receiver can power itself. Some receivers process more channels than they amplify, like the Denon AVR-X3900H (9 amplified, 11 processed): add a two-channel power amplifier and they can run a 7.1.4 system. The builder marks those with "+ power amp." Our guide to choosing an AV receiver covers the rest.

    Why the center channel should match

    Voices and on-screen sounds pan across the left, center, and right speakers. If the center comes from a different speaker line, its tone can change as a sound moves across the screen. That's why the builder pulls the center from the same family as your fronts and flags it if you swap in a different one. SVS is the one exception here: it voices its Prime and Ultra Evolution speakers to match, so you can mix those two lines. Surround and height speakers matter less, because they carry fewer sustained sounds. See how to match a center channel speaker and can you mix speaker brands?

    One subwoofer or several?

    Choose up to four subwoofers. Bass in a room is uneven: standing waves make it boom at some seats and thin out at others. One subwoofer can sound great at one seat and wrong a few feet away. Two or more subwoofers in different spots excite those standing waves differently, so bass evens out across all the seats. That's why a second sub is often a bigger improvement than a more expensive single sub, especially with more than one row of seats or in a large, open room.

    Our subwoofer placement guide covers the crawl method, and the Subwoofer Matcher helps you pick the right size and type of sub for your room.

    The speaker families

    About the prices

    Amazon prices are the prices we saw when we last checked, and they change often. Aperion prices are list prices from Aperion's own store. Speakers sold in pairs are counted in pairs, so a 7.1 system with paired surrounds needs two pairs. The total covers speakers, subwoofers, and the receiver only. Budget for speaker wire, banana plugs, wall mounts, and stands too. Our picks are based on manufacturer specs and published reviews, not our own lab measurements.

    Frequently asked questions

    What speakers do I need for a 5.1 home theater?
    A 5.1 system needs a pair of front speakers, a center channel, a pair of surround speakers, a subwoofer, and a 5-channel (or larger) AV receiver to power them. Choose the center from the same speaker line as the fronts so voices sound consistent across the screen.
    Can I use more than one subwoofer?
    Yes. Two or more subwoofers placed in different spots give smoother bass across several seats. Most receivers have two subwoofer outputs (".2"), and some have four (".4"). If you have more subs than outputs, an RCA Y-splitter can feed two subs from one output. Identical subs are the easiest to set up.
    What receiver do I need for Dolby Atmos?
    A 5.1.2 Atmos system needs 7 amplified channels, a 5.1.4 or 7.1.2 system needs 9, and a 7.1.4 system needs 11. Some receivers process more channels than they amplify, so you can add a two-channel power amplifier for the extra speakers.
    Should all my speakers be the same brand?
    The front left, center, and right speakers should come from the same speaker line, because sounds pan across them. Surround and height speakers are more forgiving, and room correction helps them blend. SVS voices its Prime and Ultra Evolution lines to match, so those can be mixed.
    How much does a home theater system cost?
    Using our picks, a 5.1 speaker system with a subwoofer and receiver starts at roughly $2,000 to $2,500 and rises with premium speaker lines, extra subwoofers, and Atmos height speakers. Use the builder above to see a total for the exact layout you want.