Tell us about your room, your speakers, and how you listen, and the Subwoofer Matcher recommends how many subwoofers to get, what size, sealed or ported, and where to set the crossover. Then it ranks our subwoofer picks for your setup, from compact sealed subs to 15-inch models for big rooms.
For most living rooms, a 12-inch subwoofer is the right size. Pick sealed for music and smaller rooms, and ported for movies and bigger rooms.
Set the crossover to 80 Hz to start, or 100 to 120 Hz with small satellite speakers. With several seats or a large open room, two subwoofers beat one.
Recommendations are rules of thumb based on room size, use, and published specs, not measurements of your room. Prices are what we saw in November 2026 and change often. Aperion prices are from Aperion's own store.
Room size matters most. A bigger room takes more air to fill, and bass below about 40 Hz takes a lot of cone movement to play loudly. As a rough guide:
| Room | Driver size | Notes |
|---|---|---|
| Small (under 200 sq ft) | 10 or 12 inches | A compact sealed sub blends easily and fits beside furniture. |
| Medium (200–400 sq ft) | 12 inches | The sweet spot for most living rooms. |
| Large or open plan (400+ sq ft) | 12 or 15 inches, or two subs | Open rooms "leak" bass into the rest of the house, so you need more output. |
Driver size isn't everything. Amplifier power, cabinet size, and design matter just as much: a well-designed 12-inch sub can outplay a cheap 15-inch one. Treat size as a starting point, then compare the actual models.
Sealed subwoofers tend to sound tight and quick, roll off gently, and stay compact, which suits music and smaller rooms. Ported subwoofers use a tuned vent to play louder and deeper for the same driver and amplifier, which suits movies and bigger rooms, but the cabinets are larger. Some subs, like Aperion's Daedalus line, come with foam plugs so you can run them either way. Our sealed vs. ported subwoofer guide explains the tradeoff in detail, and our SVS SB-1000 Pro vs. PB-1000 Pro comparison shows it with two otherwise similar subs.
The crossover is the frequency where your receiver hands bass from the speakers to the subwoofer. Set the speakers to "Small" in the receiver's setup menu, and set the crossover there rather than on the subwoofer. On the sub itself, set the low-pass control to its highest setting or LFE mode so the receiver does the work.
| Main speakers | Crossover to start with |
|---|---|
| Small satellites (4- to 5.25-inch woofers) | 100–120 Hz |
| Bookshelf speakers (6.5-inch woofers or larger) | 80 Hz |
| Towers | 80 Hz (try 60 Hz with large towers) |
80 Hz is the THX standard and a safe starting point for most systems. After setting it, adjust the phase so the sub and speakers play together. Our subwoofer phase guide shows how.
One subwoofer is fine for one or two seats. With more seats, two subs placed apart give smoother bass from seat to seat, because they excite the room's standing waves differently. Two identical subs are also easier to set up than two different ones. Plan a full system with multiple subs, and check your receiver has enough subwoofer outputs, in our Home Theater System Builder.
Start with the sub along the front wall, a little off-center, then try the crawl method: put the sub at your seat, play bass-heavy music, and crawl around the room to find where bass sounds most even. Put the sub there. Our subwoofer placement guide walks through it step by step.