Shopping for a music streamer or a small amp, you run into DACs, streamers, streamer amps, Bluetooth receivers, and powered speakers, and it's hard to tell which ones you actually need. The good news: most setups need only one or two boxes. Here's what each one does, and simple diagrams of the setups that work.

The short answer

You almost never need a separate DAC. Every phone, computer, music streamer, powered speaker, streamer amp, and AV receiver already has one built in.

What you need depends on your speakers. Powered speakers have an amp inside, so they only need a source: your phone over Bluetooth, or a streamer. Passive speakers need an amplifier too, either a streamer amp, a Bluetooth amp, or a receiver. If you have a current AV receiver, it likely already streams over Wi-Fi and you need nothing extra.

In this guide
  1. The jobs in every music system
  2. Six ways to hook up speakers
  3. Hooking up headphones
  4. When a separate DAC is worth it
  5. Do you need a streamer with an AV receiver?
  6. Frequently asked questions

The jobs in every music system

However many boxes you have, four jobs always happen in the same order. Something has to find the music, something has to turn it from digital into analog, something has to amplify that small analog signal, and speakers turn it into sound. Shopping gets easier once you see that most products just bundle two or three of those jobs into one box.

BoxIts jobAlready built into
StreamerPlays music from Spotify, Tidal, Apple Music, and others over Wi-FiStreamer amps, most AV receivers, many powered and wireless speakers
DACTurns digital audio into an analog signalPhones, computers, TVs, streamers, powered speakers, receivers, Bluetooth receivers
AmplifierBoosts that signal enough to move speaker driversPowered speakers, streamer amps, receivers, soundbars
Passive speakersTurn the amplified signal into soundNeed a separate amp, connected with speaker wire
Powered speakersAmplifier and speakers in one; most add a DAC and BluetoothPlug straight into a phone, streamer, TV, or turntable

A DAC (digital-to-analog converter) is the piece that confuses people most. Every music file and stream is a long string of numbers, and a DAC is the chip that turns those numbers into the continuous electrical wave an amplifier can work with. Because almost every device has one, the only question is which box in your chain does the converting. In the diagrams below, that's the dark box.

Six ways to hook up speakers

From simplest to most involved. Pick the one that matches the speakers you have or want.

Dark box: where digital audio becomes analog (there's only ever one)Dashed box: remote control only, the music doesn't pass through it

1. Powered speakers over Bluetooth (simplest)

  1. PhoneSends the music
  2. BluetoothPowered speakersBluetooth, DAC, and amp built in

2. Streamer + powered speakers

  1. Phone appJust the remote
  2. Wi-FiStreamerDAC built in
  3. RCA cablePowered speakersAmp built in
Using an optical cable instead of RCA? Then the speakers’ own DAC does the conversion.

3. Streamer amp + passive speakers

  1. Phone appJust the remote
  2. Wi-FiStreamer ampStreamer, DAC, and amp in one box
  3. Speaker wirePassive speakersNo power of their own

4. Bluetooth receiver + mini amp + passive speakers

  1. PhoneSends the music
  2. BluetoothBluetooth receiverAlso sold as a Bluetooth DAC
  3. RCA cableMini ampAdds the power
  4. Speaker wirePassive speakersNo power of their own
Many mini amps, like the Fosi BT20A Pro, have Bluetooth built in, which merges the middle two boxes into one.

5. Streamer added to an amp or receiver you already own

  1. Phone appJust the remote
  2. Wi-FiStreamerDAC built in
  3. RCA cableAmp or receiverAny line input, not phono
  4. Speaker wirePassive speakersNo power of their own
Using an optical cable into an amp with a digital input? Then the amp’s DAC does the conversion.

6. AV receiver

  1. Phone appJust the remote
  2. Wi-FiAV receiverStreaming, DAC, and amp built in
  3. Speaker wireSpeakersStereo or surround

Hooking up headphones

  1. Phone or computerSends digital audio
  2. USB cableUSB DAC/ampDongle or desktop box
  3. Headphone cableWired headphonesPowered by the amp

Wired headphones need a DAC and a small amp, just like speakers. Your phone or computer usually handles both through its headphone jack. A USB DAC/amp takes over those jobs when a phone has no headphone jack, when a computer’s jack hisses, or when your headphones need more power than a phone can give. A dongle like the Fosi DS2 fits in a pocket, and a desktop box like the Fosi ZH3 sits on a desk. Wireless headphones have their own DAC and amp inside, so they need nothing extra.

More detail, including which headphones need more power, is in our best headphone amps guide.

When a separate DAC is worth it

Since everything already has a DAC, a separate one only helps in a few situations:

In setups 1 to 6, the built-in DAC is very likely already good enough that a separate one won't reveal anything new. Spend the money on better speakers first.

Do you need a streamer with an AV receiver?

Usually not. A current AV receiver is a streamer, DAC, and amplifier in one box, which is setup 6. Add a streamer (setup 5) only if your receiver is older and has no Wi-Fi streaming, if it doesn't support the service you use (for example, Tidal Connect or Qobuz Connect), or if you want the same music playing in other rooms through a multiroom system you already use, like WiiM or Bluesound.

Choosing a new receiver? Our guide to choosing an AV receiver covers which streaming features to look for, and receiver vs. amplifier explains the difference between the two if you only need stereo.

Frequently asked questions

What does a DAC do?
A DAC (digital-to-analog converter) turns digital audio, the numbers in a music file or stream, into the analog electrical signal an amplifier and speakers can play. Every phone, computer, TV, music streamer, powered speaker, and AV receiver has one built in.
Do I need a separate DAC if I have a music streamer?
No. Music streamers have a DAC built in and send analog audio out of their RCA jacks. A separate DAC is an optional upgrade, connected to the streamer’s optical or coaxial output.
Do I need a DAC or a streamer with an AV receiver?
Usually not. Most current AV receivers have Wi-Fi streaming, Bluetooth, and a built-in DAC. A streamer is worth adding only if your receiver has no Wi-Fi streaming or doesn’t support the music service you use.
Can I connect my phone directly to passive speakers?
No. Passive speakers need an amplifier. Put a Bluetooth amp, such as the Fosi BT20A Pro, or a streamer amp, such as the WiiM Amp Pro, between the phone and the speakers.
Is Wi-Fi streaming better than Bluetooth?
Usually. Bluetooth compresses the audio and depends on your phone staying nearby. With Spotify Connect, Tidal Connect, Chromecast, or a streamer’s own app, the streamer pulls music straight from the service in full quality and your phone is only the remote. AirPlay still sends audio from your phone, but over Wi-Fi in CD-quality lossless.